Pages

Friday, June 10, 2011

Disappear Foss Building

Disappear Foss Building

If you plan to build a waterfall disappears (sometimes called Pond Less Iceland) is to be done, step by step, the area program that can monitor the progress and every step of building a waterfall in the correct order. Without a plan you can "put the cart before the horse" and the next part of the waterfall to complete the steps, which should have been closed.

Building disappearing waterfalls easy task to make it iourselfer, and can be completed in one week. With careful planning and good weekend to work in your own backyard, you can have a beautiful water garden. This will be the focus of your garden, and meeting place for family and friends.

What you need: a disappearing waterfall kit, paddles, river rock 2-3 inches stones, fine diameter of ¾ -1 ½ inches in diameter, stone, landscaping fol'ga and plants.

Disappearing waterfall kit is a great way to start. These packages are almost all you need, such as pumps, hoses, pools, colorful skimmers, adhesives and other products to build. Family rocks, stones and plants, the choice is yours, so you can use your imagination and create unique waterfall disappears.

Step 1: Make a hole the size of your pool. There should be 4 "space between the bowls and bowls and top soil in the hole to temporarily put the ball in the hole. Make sure to sink to the ground level and requires 4" clearance on each side. Remove bowl. (The use of dredged material to build a waterfall in a bit much.)

Step 2: Cover the bottom of the hole and EPDM pond liner and a protective buffer to be careful not to puncture your pond liner EPDM. (Put a protective pad next to the dirt and add EPDM pond liner and the protection buffer.) Size pond liner and protective pads on the size of the hole.

Step 3: Fill the hole about half the water of the pond liner in place.

Step 4: Place the bowl in hand and be careful not to damage the pond liner.

Step 5: Place the pump in the pool. Connecting pipelines and power to pump.

Step 6: Fill the gap between the pond liner and swimming pool with river stones, which are 2-3 cm in diameter. Fill out within 2 ½ inches from the hole on top. Filling void of water.

Step 7: Create a waterfall on the height and width you want.

Step 8: Put up a barrier waterfall.

Step 9: Run a pipe from the upper basin of the waterfall and connect it to the waterfall Virus.

Step 10: The time when you want the waterfall to go down the street covered with EPDM pond liner and protective pads (underlaiment). Place the pond liner and cover, as it did in Step 2: Run the pond liner and pad up below the waterfall barrier to change and take about 5 cm

Step 11: "It's time to decorate the waterfall rocks and plants choice of stones, which are prevalent in your area and stones used to manage and control the flow of water .. (flags work well to reduce water flow and creates a sound water.) Select hardy plants that are native to your area and is suitable for a waterfall. Make your waterfall look as natural as possible.

Step 12: Now, finally, level and better. Cover the hole and the upper pool, about 3 inches of decorative stones, including pumps and relaxing sound of water.

Keeping your extinction falls should be an easy task. Make sure your swimming pool with waterfall and free use of algal blooms kill a product that is safe for children and pets. Last but not least, do not forget to water the plants regularly and replace the water in the pool.

Two of the best features disappear cascade, leading to a relatively small area and is safe for small children. Swimming pools can be beautiful, but it may require people to hold weekly or monthly basis, especially in summer, and an outdoor pond can be an attractive hazard for children. If you want a beautiful waterfall, but do not want the upkeep and maintenance of the pond disappearing waterfall best water feature for you.

No comments:

Post a Comment